ISO 12100 Explained: Machinery Risk Assessment Step by Step, With Example
Machinery Safety

ISO 12100 Explained: Machinery Risk Assessment Step by Step, With Example

A plain guide to ISO 12100, the core international standard for machine safety: the risk assessment process, the three-step method for reducing risk, and a worked conveyor example.

πŸ“… November 2, 2026 ⏱ 12 min read Β· 1 diagram Β· 2 tables ✍️ Dr. Ahsan Rahman, PhD, P.E.

Quick summary: ISO 12100 is the international standard that sets out how to make machinery safe by design. Its full title is Safety of machinery: General principles for design, Risk assessment and risk reduction. It tells designers to define the machine's limits, identify every hazard, estimate and evaluate the risk, and then reduce it using a fixed order of measures called the three-step method. The current edition is ISO 12100:2010, published in Europe as EN ISO 12100. A revision is in progress but has not been published yet.

Most machine accidents do not happen because a machine is broken. They happen because a hazard was never identified at the design stage, or because the protection chosen was easy to bypass.

ISO 12100 exists to stop that. It gives machine builders, integrators and safety engineers one shared method for finding hazards and reducing risk, and it is the starting point for almost every other machinery safety standard.

This guide explains the ISO 12100 risk assessment process in plain language, then walks through a complete example for a simple conveyor.

01 What Is ISO 12100?

Definition

ISO 12100 is the international standard that gives the general principles for designing safe machinery. It defines the basic terms, the method for risk assessment (finding and judging risks) and the method for risk reduction (removing or controlling them). It applies to almost any kind of machine, from a small bench press to a full production line.

The 2010 edition brought together three older documents into one: ISO 12100-1, ISO 12100-2 and ISO 14121-1. That is why you will still see older references to those numbers. In Europe the same standard is published as EN ISO 12100, and many people search for it simply as "ISO12100".

ISO 12100 does not tell you exactly which guard to fit on a specific machine. It tells you how to think about every machine, so that no hazard is missed and the strongest protection is chosen first.

02 Where ISO 12100 Fits: Type A, B and C Standards

Machinery safety standards are organised in three levels. ISO 12100 sits at the top.

TypeWhat it coversExamples
Type A (basic)General principles for all machineryISO 12100
Type B1Specific safety aspects used across many machinesISO 13849-1 (safety-related control systems), ISO 13857 (safety distances)
Type B2Specific safeguards and devicesISO 14119 (interlocking devices), ISO 13850 (emergency stop), ISO 14120 (guards)
Type C (machine-specific)Detailed requirements for one type of machineISO 10218 (industrial robots) and other machine-family standards

The rule of thumb: if a Type C standard exists for your machine, follow it, because it is the most specific. If not, use ISO 12100 together with the relevant Type B standards.

03 The ISO 12100 Risk Assessment Process

ISO 12100 describes risk assessment as a structured, repeating process. It has two parts: risk analysis (understanding the risks) and risk evaluation (deciding whether they are acceptable). If they are not, you reduce the risk and assess again.

The ISO 12100 risk assessment and risk reduction process Steps: determine the limits of the machinery, identify hazards, estimate risk, evaluate risk. If the risk is adequately reduced, document it. If not, apply the three-step method and repeat the assessment. RISK ASSESSMENT 1 Β· Determine the limits of the machinery 2 Β· Identify hazards 3 Β· Estimate the risk 4 Β· Evaluate the risk Risk adequately reduced? YES β†’ document NO Risk reduction three-step method then assess again
Figure 1: The ISO 12100 process. Assessment and reduction repeat until the remaining risk is acceptable. ↔ swipe to see the whole diagram
1

Determine the limits of the machinery

Define the intended use and reasonably foreseeable misuse, every phase of the machine's life (transport, installation, operation, cleaning, maintenance, dismantling), who will use it, and the space and time limits.

2

Identify the hazards

List every hazard, hazardous situation and hazardous event, for each life phase and each task. A cleaning task often has hazards that normal operation does not.

3

Estimate the risk

For each hazard, judge how severe the harm could be and how likely it is to happen.

4

Evaluate the risk

Decide whether the risk is acceptable or must be reduced, considering what is achievable with current technology and any relevant Type B and C standards.

5

Reduce the risk and repeat

Apply the three-step method, then check again, because new measures can create new hazards. Record everything.

04 How Risk Is Estimated

ISO 12100 defines risk as a combination of two things: the severity of the possible harm and the probability that the harm occurs. The probability itself depends on three factors.

Severity of harm

How bad the injury could be, from minor bruising to permanent disability or death, and how many people could be affected.

Exposure

How often and how long people are in the danger zone, for example once a month during maintenance or every minute during loading.

Occurrence of the hazardous event

How likely it is that the dangerous event actually happens, based on reliability data, accident history and similar machines.

Possibility to avoid or limit harm

Whether a person could see the danger coming and get out of the way, which depends on speed, warning and training.

πŸ’‘

ISO 12100 does not prescribe one scoring system. Companies use risk matrices, scoring tables or graphs, and the technical report ISO/TR 14121-2 gives practical examples. What matters is that your method is consistent, documented and applied to every hazard. Methods such as FMEA and fault trees can support the analysis; the free book Modern Risk Assessment explains them step by step.

05 The Three-Step Method for Risk Reduction

The heart of ISO 12100 is the order in which you reduce risk. You must work through these steps in sequence, and only move to the next one when the previous step cannot reduce the risk enough.

1

Inherently safe design measures

Remove the hazard or reduce it by design. Examples: lower speeds or forces, rounded edges, enough clearance so fingers cannot be trapped, lower voltages, moving adjustment points outside the danger zone.

2

Safeguarding and complementary protective measures

Where hazards remain, keep people away from them. Examples: fixed guards, interlocked doors, light curtains, two-hand controls, emergency stops and means to isolate energy. The safety functions behind these devices are designed to standards such as ISO 13849-1.

3

Information for use

Warn and instruct about the remaining risk: warning signs, manuals, training requirements and personal protective equipment recommendations.

⚠️

A warning sign is never a substitute for a guard. Information for use is the last step, for residual risk only. If a hazard could be designed out or guarded, a label alone does not meet the standard.

This order follows the same idea as the hierarchy of controls used in workplace safety: elimination first, then engineering controls, then administrative measures. The free Engineering Safety book covers the hierarchy of controls, functional safety and safety integrity levels in detail.

06 ISO 12100 Risk Assessment Example: A Conveyor

Here is a simplified risk assessment example in the ISO 12100 style for a belt conveyor that feeds a packaging machine. It uses a simple High / Medium / Low scale for illustration. A real assessment would cover every life phase and task in more detail.

Machine limits: belt conveyor, 3 m long, 0.5 m/s, operated by trained production staff on two shifts. Tasks include normal running, clearing jams, cleaning at the end of each shift and monthly maintenance of the drive.

HazardTask / phaseRisk beforeRisk reduction (three-step method)Risk after
Drawing-in at the in-running nip between belt and tail pulleyCleaning, jam clearingHighDesign: nip point moved under the frame. Guard: fixed nip guard at the tail pulley.Low
Entanglement in the drive chain and sprocketsNormal running, maintenanceHighGuard: fully enclosing fixed guard, removable only with tools.Low
Unexpected start-up while hands are on the beltJam clearingHighGuard: interlocked access cover connected to a safety relay that stops the drive. Info: lockout/tagout procedure for maintenance.Low
Crushing at the transfer point to the packaging machineNormal runningMediumDesign: gap reduced to a safe distance. Info: warning label and operator training.Low
Noise from the drive gearboxNormal runningMediumDesign: quieter gearbox and anti-vibration mounts. Info: hearing protection if levels remain high.Low

Notice the pattern: every high risk is reduced first by design or guarding, and information is only added for the risk that remains. That order is what ISO 12100 requires, and it is what an assessor will check.

07 Hazard Groups to Check

ISO 12100 includes a list of example hazards to help you avoid missing any. The main groups are:

  • Mechanical: crushing, shearing, cutting, entanglement, drawing-in, impact, stabbing, friction
  • Electrical: contact with live parts, electrostatic effects, short circuits
  • Thermal: burns from hot or very cold surfaces
  • Noise and vibration
  • Radiation: lasers, ultraviolet, electromagnetic fields
  • Materials and substances: dust, fumes, chemicals, biological agents
  • Ergonomic: poor posture, heavy lifting, repetitive motion, poor visibility of controls
  • Environment: conditions where the machine is used, such as heat, dust or outdoor use
  • Combinations of the above

Machines controlled by PLCs add one more question: what happens if the control system fails? Safety functions must be designed so that a single fault does not lead to a dangerous situation, which is where standards such as ISO 13849-1 come in. If you are new to PLC control, start with our guide to ladder logic.

08 ISO 12100 in 2026: Current Edition and What Is Changing

  • Current edition: ISO 12100:2010 remains the edition in force, and EN ISO 12100:2010 in Europe.
  • Revision in progress: a new edition has been in development for several years. Earlier drafts did not pass international voting, and voting on a third draft closed in September 2026. A publication date has not been confirmed, so keep using the 2010 edition until the new one is officially released.
  • New EU Machinery Regulation: Regulation (EU) 2023/1230 applies from 20 January 2027 and replaces the Machinery Directive 2006/42/EC. Machine builders selling into Europe should follow updates on which harmonised standards apply under the new Regulation.
πŸ“Œ

Outside Europe, ISO 12100 is still widely used as the reference method for machine safety by manufacturers, integrators and multinational companies, including across the Gulf. Always check the regulations that apply in the country where the machine will be used.

09 Common Mistakes

βœ—

Assessing normal operation only

Many injuries happen during cleaning, jam clearing, setting and maintenance. Assess every life phase and task.

βœ—

Jumping straight to warning signs

Labels and training come last. Design and guarding come first.

βœ—

Ignoring foreseeable misuse

If operators are likely to reach past a guard to save time, the design must account for it.

βœ—

Not reassessing after changes

Every new guard, speed change or modification can create new hazards. Repeat the assessment.

βœ—

Poor documentation

If it is not written down, it cannot be shown to an inspector, customer or court. Record limits, hazards, estimates, measures and residual risk.

Need Help With Machinery Risk Assessment?

Dr. Ahsan Rahman offers engineering consulting and training in industrial automation, control systems and safety for companies and engineering programs.

See Engineering Services β†’

10 Frequently Asked Questions

What is ISO 12100?

ISO 12100 is the international standard that sets out the general principles for designing safe machinery. It defines how to carry out risk assessment, by identifying hazards and estimating and evaluating risk, and how to reduce risk using the three-step method: inherently safe design, safeguarding, and information for use.

What is the latest version of ISO 12100?

The current edition is ISO 12100:2010, published in Europe as EN ISO 12100:2010. A revised edition is in development but, as of late 2026, has not yet been published, so the 2010 edition remains the one to use.

What is the three-step method in ISO 12100?

The three-step method is the required order for reducing risk. Step 1 is inherently safe design measures. Step 2 is safeguarding and complementary protective measures, such as guards and interlocks. Step 3 is information for use, such as warnings, manuals and training. Each step is used only when the previous one cannot reduce the risk enough.

What are the steps of ISO 12100 risk assessment?

The steps are: determine the limits of the machinery, identify the hazards, estimate the risk, and evaluate the risk. If the risk is not acceptable, apply risk reduction and repeat the assessment until the remaining risk is acceptable, documenting each stage.

Is ISO 12100 a type A, B or C standard?

ISO 12100 is a type A standard, also called a basic safety standard. It gives general principles for all machinery. Type B standards cover specific safety aspects or devices, and type C standards give detailed requirements for particular kinds of machines.

What is the difference between ISO 12100 and ISO 13849?

ISO 12100 gives the overall method for assessing and reducing risk on any machine. ISO 13849-1 is a type B standard for designing the safety-related parts of control systems, such as interlocks and emergency stops, to a required performance level. ISO 12100 tells you what risk must be reduced; ISO 13849-1 helps you design the control system that reduces it.

Does ISO 12100 apply under the new EU Machinery Regulation?

The EU Machinery Regulation 2023/1230 applies from 20 January 2027 and replaces the Machinery Directive. Risk assessment remains a core requirement, and ISO 12100 remains the main reference method, but manufacturers should check the official list of harmonised standards under the new Regulation as it is updated.

β˜… Final Thoughts

ISO 12100 is not a checklist to fill in after a machine is built. It is a way of thinking that should start on the first day of design: understand the machine and how people will really use it, find every hazard, and remove or control the risk in the right order.

Done well, it protects operators, reduces downtime and makes compliance far easier. Done as paperwork at the end, it rarely does any of those things.

🎯

One thing to do this week: pick one machine you work with and list every task people do on it, including cleaning and jam clearing. For each task, write down one hazard. You have just completed the first two steps of an ISO 12100 risk assessment.

AR

Written by Dr. Ahsan Rahman, PhD, P.E.

Dr. Ahsan Rahman is an Associate Professor and Head of Electrical Engineering at the University of Prince Mugrin and a licensed Professional Engineer. He specialises in control systems, mechatronics and industrial automation, and is the author of free online books on engineering safety, risk assessment and PLC programming. Learn more β†’ Β· Contact β†’

Subscribe to our newsletter

Get an email when a new article or free book is published. No spam, unsubscribe any time.

πŸ”’ We only use your email to send new posts. Unsubscribe with one click.